self.machine.platform_controller

class mpf.core.platform_controller.PlatformController(machine: MachineController)

Bases: mpf.core.mpf_controller.MpfController

Manages all platforms and rules.

Accessing the platform_controller in code

There is only one instance of the platform_controller in MPF, and it’s accessible via self.machine.platform_controller.

Methods & Attributes

The platform_controller has the following methods & attributes available. Note that methods & attributes inherited from base classes are not included here.

clear_hw_rule(rule: mpf.core.platform_controller.HardwareRule)

Clear all rules for switch and this driver.

Parameters:rule – Hardware rule to clean.

set_pulse_on_hit_and_enable_and_release_and_disable_rule(enable_switch: mpf.core.platform_controller.SwitchRuleSettings, disable_switch: mpf.core.platform_controller.SwitchRuleSettings, driver: mpf.core.platform_controller.DriverRuleSettings, pulse_setting: mpf.core.platform_controller.PulseRuleSettings = None, hold_settings: mpf.core.platform_controller.HoldRuleSettings = None) → mpf.core.platform_controller.HardwareRule

Add pulse on hit and enable and release and disable rule to driver.

Pulse and then enable driver. Cancel pulse and enable when switch is released or a disable switch is hit.

Parameters:

• enable_switch –
• disable_switch –
• driver –
• pulse_setting –
• hold_settings –

set_pulse_on_hit_and_enable_and_release_rule(enable_switch: mpf.core.platform_controller.SwitchRuleSettings, driver: mpf.core.platform_controller.DriverRuleSettings, pulse_setting: mpf.core.platform_controller.PulseRuleSettings = None, hold_settings: mpf.core.platform_controller.HoldRuleSettings = None) → mpf.core.platform_controller.HardwareRule

Add pulse on hit and enable and relase rule to driver.

Pulse and enable a driver. Cancel pulse and enable if switch is released.

Parameters:

• enable_switch – Switch which triggers the rule.
• driver – Driver to trigger.
• pulse_setting –

  class PulseRuleSettings

• hold_settings –

  class HoldRuleSettings

set_pulse_on_hit_and_release_rule(enable_switch: mpf.core.platform_controller.SwitchRuleSettings, driver: mpf.core.platform_controller.DriverRuleSettings, pulse_setting: mpf.core.platform_controller.PulseRuleSettings = None) → mpf.core.platform_controller.HardwareRule

Add pulse on hit and relase rule to driver.

Pulse a driver but cancel pulse when switch is released.

Parameters:

• enable_switch – Switch which triggers the rule.
• driver –

  class DriverRuleSettings

• pulse_setting –

  class PulseRuleSettings

set_pulse_on_hit_rule(enable_switch: mpf.core.platform_controller.SwitchRuleSettings, driver: mpf.core.platform_controller.DriverRuleSettings, pulse_setting: mpf.core.platform_controller.PulseRuleSettings = None) → mpf.core.platform_controller.HardwareRule

Add pulse on hit rule to driver.

Always do the full pulse. Even when the switch is released.

Parameters:

• enable_switch – Switch which triggers the rule.
• driver –

  class DriverRuleSettings

• pulse_setting –

  class PulseRuleSettings