Warning

This documentation is for an unreleased version of MPF!

This is the developer documentation for MPF 0.51, which is the “dev” (next) release of MPF that is a work-in-progress. Use the “Read the Docs” link in the lower left corner to view the developer docs for the version of MPF you’re using.

self.machine.hardware_platforms[‘rpi’]

class mpf.platforms.rpi.rpi.RaspberryPiHardwarePlatform(machine)

Bases: mpf.core.platform.SwitchPlatform, mpf.core.platform.DriverPlatform, mpf.core.platform.ServoPlatform, mpf.core.platform.I2cPlatform

Control the hardware of a Raspberry Pi.

Works locally and remotely via network.

Accessing the rpi platform via code

Hardware platforms are stored in the self.machine.hardware_platforms dictionary, so the rpi platform is available via self.machine.hardware_platforms['rpi'].

Methods & Attributes

The rpi platform has the following methods & attributes available. Note that methods & attributes inherited from base classes are not included here.

clear_hw_rule(switch: mpf.core.platform.SwitchSettings, coil: mpf.core.platform.DriverSettings)

Raise exception.

configure_driver(config: mpf.core.platform.DriverConfig, number: str, platform_settings: dict) → mpf.platforms.interfaces.driver_platform_interface.DriverPlatformInterface

Configure an output on the Raspberry Pi.

configure_i2c(number: str)

Configure I2c device.

configure_servo(number: str) → mpf.platforms.interfaces.servo_platform_interface.ServoPlatformInterface

Configure a servo.

configure_switch(number: str, config: mpf.core.platform.SwitchConfig, platform_config: dict) → mpf.platforms.interfaces.switch_platform_interface.SwitchPlatformInterface

Configure a switch with pull up.

get_hw_switch_states()

Return current switch states.

initialize()

Initialise platform.

send_command(cmd)

Add a command to the command queue.

set_pulse_on_hit_and_enable_and_release_and_disable_rule(enable_switch: mpf.core.platform.SwitchSettings, disable_switch: mpf.core.platform.SwitchSettings, coil: mpf.core.platform.DriverSettings)

Raise exception.

set_pulse_on_hit_and_enable_and_release_rule(enable_switch: mpf.core.platform.SwitchSettings, coil: mpf.core.platform.DriverSettings)

Raise exception.

set_pulse_on_hit_and_release_rule(enable_switch: mpf.core.platform.SwitchSettings, coil: mpf.core.platform.DriverSettings)

Raise exception.

set_pulse_on_hit_rule(enable_switch: mpf.core.platform.SwitchSettings, coil: mpf.core.platform.DriverSettings)

Raise exception.

stop()

Stop platform.