Warning

This documentation is for an unreleased version of MPF!

This is the developer documentation for MPF 0.54, which is the “dev” (next) release of MPF that is a work-in-progress. Use the “Read the Docs” link in the lower left corner to view the developer docs for the version of MPF you’re using.

self.machine.hardware_platforms[‘system11’]¶

class mpf.platforms.system11.System11OverlayPlatform(machine: mpf.core.machine.MachineController)¶

Bases: mpf.core.platform.DriverPlatform, mpf.core.platform.SwitchPlatform

Overlay platform to drive system11 machines using a WPC controller.

Accessing the system11 platform via code

Hardware platforms are stored in the self.machine.hardware_platforms dictionary, so the system11 platform is available via self.machine.hardware_platforms['system11'].

Methods & Attributes

The system11 platform has the following methods & attributes available. Note that methods & attributes inherited from base classes are not included here.

a_side_active¶: Return if A side cannot be switches off right away.

a_side_busy¶: Return if A side cannot be switches off right away.

c_side_active¶: Return if C side cannot be switches off right away.

c_side_busy¶: Return if C side cannot be switches off right away.

clear_hw_rule(switch, coil)¶: Clear a rule for a driver on the system11 overlay.

configure_driver(config: mpf.core.platform.DriverConfig, number: str, platform_settings: dict)¶

Configure a driver on the system11 overlay.

Parameters:	config – Driver config dict number – Number of the driver. platform_settings – Platform specific config.

configure_switch(number: str, config: mpf.core.platform.SwitchConfig, platform_config: dict)¶: Configure switch on system11 overlay.

driver_action(driver, pulse_settings: Optional[mpf.platforms.interfaces.driver_platform_interface.PulseSettings], hold_settings: Optional[mpf.platforms.interfaces.driver_platform_interface.HoldSettings], side: str)¶

Add a driver action for a switched driver to the queue (for either the A-side or C-side queue).

Parameters:	driver – A reference to the original platform class Driver instance. pulse_settings – Settings for the pulse or None hold_settings – Settings for hold or None side – Whatever the driver is on A or C side.

This action will be serviced immediately if it can, or ASAP otherwise.

get_hw_switch_states()¶: Get initial hardware state.

initialize()¶: Automatically called by the Platform class after all the core modules are loaded.

set_pulse_on_hit_and_enable_and_release_and_disable_rule(enable_switch: mpf.core.platform.SwitchSettings, eos_switch: mpf.core.platform.SwitchSettings, coil: mpf.core.platform.DriverSettings, repulse_settings: Optional[mpf.core.platform.RepulseSettings])¶

Configure a rule for a driver on the system11 overlay.